Heterocyclic Building Blocks-Naphthyridine

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

0387-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (100 mg), pyrimidine-5-amine (38 mg), tris(dibenzylideneacetone)dipalladium(0) (37 mg), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (47 mg), cesium carbonate (267 mg), and 1,4-dioxane (2 mL) was stirred at 80 C. for 6 hours. The reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the obtained solution was purified by silica gel column chromatography (methanol-ethyl acetate), thereby obtaining 6-chloro-N-(pyrimidin-5-yl)-1,5-naphthyridine-3-amine (32 mg). MS m/z (M+H): 258.

1309774-03-5 7-Bromo-2-chloro-1,5-naphthyridine 58310544, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.249889-68-7,8-Chloro-2-methoxy-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

Under an atmosphere of argon, a mixture of 4-chloro-6-methoxy-l,5-naphthyridine (0.485 g), methyl 2-(5-hydroxy-3-methoxypyridin-2-yl)acetate (0.493 g), caesium carbonate (1.63 g) and DMF (10 ml) was stirred and heated to 13O0C for 7 hours. The resultant mixture was cooled to ambient temperature and partitioned between ethyl acetate and water. The organic phase was dried over magnesium sulphate and evaporated. The residue was purified by column chromatography on silica using increasingly polar mixtures of ethyl acetate and methanol as eluent. There was thus obtained methyl 2-[3-methoxy-5-(6-methoxy- l,5-naphthyridin-4-yloxy)pyridin-2-yl]acetate as a solid (0.51 g); 1H NMR Spectrum: T/GB2007/001221- 171 -(DMSOd6) 3.63 (s, 3H), 3.79 (s, 2H), 3.8 (s, 3H)5 3.83 (s, 3H), 7.13 (d, IH), 7.29 (d, IH)5 7.44 (d, IH)5 7.98 (d, IH)5 8.3 (d, IH)5 8.68 (d, IH); Mass Spectrum: M+H+ 356.

The synthetic route of 249889-68-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2007/113548; (2007); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.27225-00-9,2,7-Naphthyridin-1-amine,as a common compound, the synthetic route is as follows.

4-Bromo-2,7-naphthyridin-1-ylamine32 g of 2,7-naphthyridin-1-ylamine is dissolved in 200 ml of acetic acid at room temperature. 35 g of bromine in 200 ml of acetic acid are then added slowly that the temperature does not exceed 25. The mixture is stirred for a further 60 minutes.The suspension obtained is dissolved in 500 ml of water, and the pH is adjusted to pH 7-8 using 500 ml of 25% aqueous ammonia solution.The mixture is stirred for 14 h. The brown precipitate is filtered off, washed with water and dried, giving 28.3 g of crude product. Purification by flash chromatography in ethyl acetate/methanol gives 18.5 g of 4-bromo-2,7-naphthyridin-1-ylamine, M224.06 g/mol, M+H found 224.

The synthetic route of 27225-00-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Merck Patent GmbH; Jonczyk, Alfred; Zenke, Frank T.; Amendt, Christiane; US2015/252041; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

337958-60-8, 5,7-Dichloro-1,6-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To an ice cooled solution of 1 ,1-dimethylethyl (3S)-3-fluoro-3-(hydroxymethyl)-1 – piperidinecarboxylate (1.406g, 6.03mmol) in DMF (20ml) was added sodium hydride (0.313g, 7.84mmol) (60% dispersion in mineral oil). This was stirred for 15min before adding 5,7-dichloro-1 ,6-naphthyridine (1 .2g, 6.03mmol). This was warmed to room temp and stirred for 4h. The reaction had gone to completion and so was cautiously quenched with aqueous ammonium chloride before partitioning between aqueous ammonium chloride and ethyl acetate. The layers were separated and the aqueous was re-extracted with ethyl acetate. The combined organics were washed with brine and concentrated in vacuo to give the crude product. This was dissolved in DCM and purified through silica (50g), eluting with a gradient of 0-50% ethyl acetate in DCM. Appropriate fractions were concentrated in vacuo to yield the title compound as a cream foamy gum (1.91 g).LCMS: Rt = 1.18min, MH+ = 395.85

The synthetic route of 337958-60-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GLAXO GROUP LIMITED; ATKINSON, Francis Louis; BARKER, Michael David; DOUAULT, Clement; GARTON, Neil Stuart; LIDDLE, John; PATEL, Vipulkumar Kantibhai; PRESTON, Alexander George Steven; WILSON, David Matthew; WO2011/134971; (2011); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.952059-69-7,8-Chloro-3-methoxy-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

2-(2-(7-Methoxyquinolin-4-ylamino)ethyl)-6-phenylpyridazin-3(2H)- one. A mixture of 2-(2-aminoethyl)-6-phenylpyridazin-3(2H)-one (60 mg, 743 mumol) and 8-chloro-3-methoxy-l,5-naphthyridine (55 mg, 282 mumol) in iPrOH (2 mL) was heated to 150 0C for 15 min under microwave. The mixture was filtered and the filtrate was chromatographed on silica with 2-5% (2N NH3-MeOH) in CH2Cl2 to give the product as a white solid (60 mg). MS (ESI pos. ion) calc’d for C2IHi9N5O2: 373.1; found 374.2 (MH+). 1H NMR (400 MHz, Chloroform-d) delta ppm 3.81 – 3.89 (m, 2 H) 3.92 (d, J=I.37 Hz, 3 H) 4.64 (t, J=5.48 Hz, 2 H) 6.54 (dd, 1 H) 7.03 (dd, J=9.78, 1.57 Hz, 1 H) 7.10 (s, 1 H) 7.39 – 7.48 (m, 4 H) 7.66 (dd, J=9.59, 1.56 Hz, 1 H) 7.70 – 7.79 (m, 2 H) 8.38 (t, 1 H) 8.46 (dd, 1 H).

As the paragraph descriping shows that 952059-69-7 is playing an increasingly important role.

Reference£º
Patent; AMGEN INC.; WO2008/103277; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

254-79-5, 1,5-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example la: Synthesis of 3-bromo-l,5-naphthyridine (C-2) [00305] To a stirred mixture of 1,5-naphthyridine (C-1) (50.0 g, 384 mmol, 1.0 eq) and sodium acetate(62.9 g, 768 mmol, 2.0 eq) in acetic acid (300 mL) at 80 C, a solution of bromine (67.5 g, 422 mmol, 1.1 eq) in acetic acid (80 mL) was added dropwise while keeping the reaction temperature at 80 C to 90 C. After stirring for 2 h at 80 C, the reaction was complete based on TLC analysis. The resulting mixture was cooled to RT and then filtered. The filtrate was concentrated in vacuo and the residue was purified by flash column chromatography on silica gel (0-30% ethyl acetate-petroether) to afford the desired product 3-bromo-l,5-naphthyridine (C-2) (36.5 g, 45 % yield ) as a pale yellow solid. lR NMR (300 MHz, CDC13- (5) delta: 8.97 (m, 2H), 8.57 (s, 1H), 8.37 (d, J = 8.4 Hz, 1H), 7.65 (m, 1H); ESI-MS m/z : 208.96 [M+H]+.

The synthetic route of 254-79-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; INTELLIKINE, LLC; REN, Pingda; LI, Liansheng; CHAN, Katrina; WO2013/78441; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

952059-69-7, 8-Chloro-3-methoxy-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a suspension of tert- butyl (6-bromo- [1,2,4] triazolo [4 , 3 -a] pyridin-3- yUmethylcarbamate (0.900 g, 2.75 mmol) in CH2Cl2 (10 mL) was added TFA (0.848 ml, 11.0 mmol) and the mixture stirred at rt. After 30 minutes additional TFA (0.848 ml, 11.0 mmol) was added, and the mixture stirred at rt 2 h more then concentrated. The residue was taken up into 2-butanol (5 mL) and combined with 8-chloro-3-methoxy-l, 5-naphthyridine (0.535 g, 2.75 mmol) in a 5 mL microwave vessel. The vessel was sealed and the mixture heated in the microwave for 10 min at 120 C with a 60 sec prestir. The mixture was concentrated, diluted with DCM and stirred with 2N NaOH (pH 14) for 30 minutes. The solid was filtered to afford the title compound as a beige solid.

As the paragraph descriping shows that 952059-69-7 is playing an increasingly important role.

Reference£º
Patent; AMGEN INC.; WO2008/8539; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

952059-69-7, 8-Chloro-3-methoxy-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

l-(2-(7-methoxy-l,5-naphthyridin-4-ylamino)ethyl)-5-(thiophen-2- yl)pyridin-2(lH)-one.; A suspension of 8-chloro-3-methoxy-l,5-naphthyridine (35 mg, 182 mumol) and l-(2-aminoethyl)-5-(thiophen-2-yl)pyridin-2(lH)-one (40 mg, 182 mumol) in iPrOH (0.5mL) was heated to 100C overnight. The mixture was partitioned between CH2Cl2 (10 mL) and IM NaOH (5mL). The aqueous was further extracted with CH2Cl2 (2x 5mL) and combined organics dried over MgSO4 then purified on silica (12 g) eluting with 15-60% of 5% (MeOH/ CH2Cl2). MS (ESI pos. ion) m/z (MH+): 379. Calc’d exact mass for C20H18N4O2S: 378. 1H NMR (400 MHz, Chloroform-d) delta ppm 3.09 (br. s., 1 H) 3.85 (q, J=6.13 Hz, 2 H) 3.93 (s, 3 H) 4.28 (t, J=5.97 Hz, 2 H) 6.57 (d, J=5.48 Hz, 1 H) 6.65 (d, J=9.59 Hz, 1 H) 6.81 (d, J=2.74 Hz, 1 H) 6.91 – 7.00 (m, 2 H) 7.10 – 7.15 (m, 1 H) 7.34 (d, J=2.54 Hz, 1 H) 7.50 – 7.58 (m, 2 H) 8.40 (d, J=2.74 Hz, 1 H) 8.45 (d, J=5.48 Hz, 1 H).

952059-69-7 8-Chloro-3-methoxy-1,5-naphthyridine 59427340, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; AMGEN INC.; WO2008/103277; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17965-71-8,3-Bromo-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

3-bromonaphthyridine (44.5 g, 0.213 mol), absolute ethanol (357 mL),N,N-dimethylformamide (90 mL) was added, palladium chloride (2.65 g), triethylamine (32.28 g, 0.32 mol),The reaction liquid was spin-dried by reacting carbon monoxide at a pressure of 0.8 MPa at 75 C for 6 h.Use petroleum ether: ethyl acetate = 10:1 ~ 1:1 over the column,Methyl 1,5-naphthyridin-3carboxylate (34 g, white solid, yield 84%).

As the paragraph descriping shows that 17965-71-8 is playing an increasingly important role.

Reference£º
Patent; Suzhou Kangrun Pharmaceutical Co., Ltd.; Jin Haowen; Xu Weiliang; Xu Weizheng; (8 pag.)CN108658977; (2018); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1569-16-0,2-Methyl[1,8]-Naphthyridine,as a common compound, the synthetic route is as follows.

adding 0.3 mmol of 2-methyl-1,8-naphthyridine, 0.75 mmol of elemental iodine, and 2 mL of dimethyl sulfoxide to a 15 mL pressure-resistant tube.The reaction was stirred magnetically at 110 C for 4 hours. After the reaction was cooled, 0.36 mmol of p-toluenesulfonylhydrazide and 0.9 mmol of potassium phosphate trihydrate were added, and magnetic stirring was carried out at 110 C for 6 hours. After the reaction was completed, the reaction solution was completed. Extraction, organic layer washing, drying, distillation under reduced pressure to obtain a crude product, crude product with petroleum ether / ethyl acetate = 1.5:1 ~ 2:1 (V / V) as the eluent for column separation and purification The desired product, the product is a yellow solid with a yield of 65%.

1569-16-0 2-Methyl[1,8]-Naphthyridine 74073, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; Yantai University; Zhu Yanping; Lv Xucheng; Sun Jina; He Hangli; Sun Yuanyuan; Weng Weizhao; Wang Ru; Lv Lijuan; Huang Qiang; (17 pag.)CN110105355; (2019); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem