Category: 72754-05-3

Name is 6-Bromo-1,8-naphthyridin-2-ol, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 72754-05-3, its synthesis route is as follows.,72754-05-3

Boronic acid 7: To a solution of compound 6 (10 g, 44.44 mmol) in dry tetrahydrofuran (350 mL) was added sodium hydride (2 g, 66.66 mmol, 80% dispersion) at 0 C. After the mixture was stirred at room temperature for 30 min, the mixture was cooled below -60 C. in a dry ice/acetone bath, and n-butyllithium (70 mL, 112 mmol, 1.6 M in hexane) was added over 30 min. The mixture was kept stirring for another 30 min, then triisopropyl borate (40 mL, 177 mmol) was added dropwise. The reaction mixture was stirred for 10 min, and then warmed to 0 C. slowly in an ice bath. HCl (5 N) was added to the mixture to adjust pH=3-4, and the mixture was stirred for 20 min. Aq. NaOH was added to the mixture to adjust pH=10. After filtration, the organic layer was separated. The aqueous layer was extracted with a mixture of ethyl acetate/THF (4/1; 2¡Á120 mL) and EtOAc (100 mL). The aqueous layer was adjusted to pH=5-6 with HCl. The precipitate thus formed was collected by filtration and dried to give boronic acid 7 (3.5 g, 41%) as a white solid

With the complex challenges of chemical substances, we look forward to future research findings about 6-Bromo-1,8-naphthyridin-2-ol

Reference£º
Patent; OTSUKA PHARMACEUTICAL CO., LTD.; ABUDUSAIMI, Mamuti; YE, Fangguo; SUN, Jiangqin; MIYAMOTO, Hisashi; CHENG, Jay-Fei; OKA, Daisuke; US2014/179675; (2014); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

72754-05-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-Bromo-1,8-naphthyridin-2-ol, cas is 72754-05-3,the naphthyridine compound, it is a common compound, a new synthetic route is introduced below.

Boronic acid 7: To a solution of compound 6 (10 g, 44.44 mmol) in dry tetrahydrofuran (350 mL) was added sodium hydride (2 g, 66.66 mmol, 80% dispersion) at 0 C. After the mixture was stirred at room temperature for 30 min, the mixture was cooled below -60 C. in a dry ice/acetone bath, and n-butyllithium (70 mL, 112 mmol, 1.6 M in hexane) was added over 30 min. The mixture was kept stirring for another 30 min, then triisopropyl borate (40 mL, 177 mmol) was added dropwise. The reaction mixture was stirred for 10 min, and then warmed to 0 C. slowly in an ice bath. HCl (5 N) was added to the mixture to adjust pH=3-4, and the mixture was stirred for 20 min. Aq. NaOH was added to the mixture to adjust pH=10. After filtration, the organic layer was separated. The aqueous layer was extracted with a mixture of ethyl acetate/THF (4/1; 2¡Á120 mL) and EtOAc (100 mL). The aqueous layer was adjusted to pH=5-6 with HCl. The precipitate thus formed was collected by filtration and dried to give boronic acid 7 (3.5 g, 41%) as a white solid

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-Bromo-1,8-naphthyridin-2-ol, 72754-05-3

Reference£º
Patent; OTSUKA PHARMACEUTICAL CO., LTD.; ABUDUSAIMI, Mamuti; YE, Fangguo; SUN, Jiangqin; MIYAMOTO, Hisashi; CHENG, Jay-Fei; OKA, Daisuke; US2014/179675; (2014); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 6-Bromo-1,8-naphthyridin-2-ol, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 72754-05-3, its synthesis route is as follows.,72754-05-3

Step 1: To a stirred solution of 6-bromo-1,8-naphthyridin-2(1H)-one (1 equiv) in DIVIF (0.2 M) at 25 C were added cesium carbonate (1.3 equiv) and iodoethane (1.1 equiv) and the reaction was stirred for 30 mm. The mixture was poured onto water and extracted three times with ethyl acetate. The combined organics were washed with water and brine, dried over MgSO4, filtered, and concentrated to give 6-bromo-1-ethyl-1,8-naphthyridin-2(1H)-one as a yellow solid in 87% yield, which was used without further purification. LCMS (m/z) (M+H) = 253.0/255.0, Rt = 0.91 mm

With the complex challenges of chemical substances, we look forward to future research findings about 6-Bromo-1,8-naphthyridin-2-ol

Reference£º
Patent; NOVARTIS AG; AVERSA, Robert John; BURGER, Matthew T.; DILLON, Michael Patrick; DINEEN JR., Thomas A.; KARKI, Rajesh; RAMURTHY, Savithri; RAUNIYAR, Vivek; ROBINSON, Richard; SARVER, Patrick James; (374 pag.)WO2017/103824; (2017); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

6-Bromo-1,8-naphthyridin-2-ol, cas is 72754-05-3, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.,72754-05-3

6-bromo-1-((2-(trimethylsilyl)ethoxy)methyl)-1,8-naphthyridin-2(1H)-one To a solution of 6-bromo-1,8-naphthyridin-2(1H)-one (0.1 g, 0.444 mmol) in DMF (2 mL) was added sodium hydride (0.021 g, 0.889 mmol) at 0 C. The reaction was stirred at 0 C. for 30 min, then SEM-Cl (0.118 mL, 0.667 mmol) was added. The reaction was stirred at room temperature overnight, then diluted with ammonium chloride solution, extracted with ethyl acetate, dried over Na2SO4, and concentrated. The crude product was purified by flash chromatography on silica gel using 20% ethyl acetate in petroleum ether to give 6-bromo-1-((2-(trimethylsilyl)ethoxy)methyl)-1,8-naphthyridin-2(1H)-one (0.12 g, 76%). 1HNMR 400 MHz (CDCl3): 0.034 (s, 9H), 0.95-0.99 (m, 2H), 3.73-3.77 (m, 2H), 5.92 (s, 2H), 6.75-6.77 (m, 1H), 7.56-7.58 (m, 1H), 7.96-7.98 (m, 1H), 8.63-8.64 (m, 1H).

With the rapid development of chemical substances, we look forward to future research findings about 6-Bromo-1,8-naphthyridin-2-ol

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; King, Dalton; Macor, John E.; Olson, Richard E.; Iwuagwu, Christiana I.; Karageorge, George N.; US2013/79338; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Name is 6-Bromo-1,8-naphthyridin-2-ol, as a common heterocyclic compound, it belongs to naphthyridine compound, and cas is 72754-05-3, its synthesis route is as follows.,72754-05-3

A mixture of 6-bromo-lH-l, 8-naphthyridin-2-one (1 equiv, which was prepared as per prepared as per- 1.3), Pd (PPh3)2Cl2 (0.1 equiv), Cul (0.15 equiv), (i-Pr)2EtN (4 equiv) in DMF (15 times) was deoxygenated with nitrogen for 15 minutes. Then vinyl trimethyl silane (2 equiv) was added and heated to 125C for lOh. The reaction was monitored by thin layer chromatography. Filtered through a pad of silica gel at room temperature. The filtrate was concentrated and the residue was purified by silica gel chromatography (eluted with 20 to 30% ethyl acetate/hexane) to provide the title compound as a solid (30% yield). ESI MS m/z -245.22(M+H)+.

With the complex challenges of chemical substances, we look forward to future research findings about 6-Bromo-1,8-naphthyridin-2-ol

Reference£º
Patent; NATCO PHARMA LIMITED; KOMPELLA, Amala; GAMPA, Venugopala Krishna; GANGANAMONI, Srinivasulu; SIRIGIREDDY, Balakrishna Reddy; ADIBHATLA, Kali Satya Bhujanga Rao; NANNAPANENI, Venkaiah Chowdary; WO2015/186137; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

72754-05-3, 6-Bromo-1,8-naphthyridin-2-ol is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,72754-05-3

Step 1: To a stirred solution of 6-bromo-1,8-naphthyridin-2(1H)-one (1 equiv) in DIVIF (0.2 M) at 25 C were added cesium carbonate (1.3 equiv) and iodoethane (1.1 equiv) and the reaction was stirred for 30 mm. The mixture was poured onto water and extracted three times with ethyl acetate. The combined organics were washed with water and brine, dried over MgSO4, filtered, and concentrated to give 6-bromo-1-ethyl-1,8-naphthyridin-2(1H)-one as a yellow solid in 87% yield, which was used without further purification. LCMS (m/z) (M+H) = 253.0/255.0, Rt = 0.91 mm

As the paragraph descriping shows that 72754-05-3 is playing an increasingly important role.

Reference£º
Patent; NOVARTIS AG; AVERSA, Robert John; BURGER, Matthew T.; DILLON, Michael Patrick; DINEEN JR., Thomas A.; KARKI, Rajesh; RAMURTHY, Savithri; RAUNIYAR, Vivek; ROBINSON, Richard; SARVER, Patrick James; (374 pag.)WO2017/103824; (2017); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.72754-05-3,6-Bromo-1,8-naphthyridin-2-ol,as a common compound, the synthetic route is as follows., Author tianliPosted on September 25, 2020Categories 72754-05-3, naphthyridineTags M.W:200-300

72754-05-3, 6-Bromo-1,8-naphthyridin-2-ol is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,72754-05-3

Boronic acid 7: To a solution of compound 6 (10 g, 44.44 mmol) in dry tetrahydrofuran (350 mL) was added sodium hydride (2 g, 66.66 mmol, 80% dispersion) at 0 C. After the mixture was stirred at room temperature for 30 min, the mixture was cooled below -60 C. in a dry ice/acetone bath, and n-butyllithium (70 mL, 112 mmol, 1.6 M in hexane) was added over 30 min. The mixture was kept stirring for another 30 min, then triisopropyl borate (40 mL, 177 mmol) was added dropwise. The reaction mixture was stirred for 10 min, and then warmed to 0 C. slowly in an ice bath. HCl (5 N) was added to the mixture to adjust pH=3-4, and the mixture was stirred for 20 min. Aq. NaOH was added to the mixture to adjust pH=10. After filtration, the organic layer was separated. The aqueous layer was extracted with a mixture of ethyl acetate/THF (4/1; 2¡Á120 mL) and EtOAc (100 mL). The aqueous layer was adjusted to pH=5-6 with HCl. The precipitate thus formed was collected by filtration and dried to give boronic acid 7 (3.5 g, 41%) as a white solid

The synthetic route of 72754-05-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; OTSUKA PHARMACEUTICAL CO., LTD.; ABUDUSAIMI, Mamuti; YE, Fangguo; SUN, Jiangqin; MIYAMOTO, Hisashi; CHENG, Jay-Fei; OKA, Daisuke; US2014/179675; (2014); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.72754-05-3,6-Bromo-1,8-naphthyridin-2-ol,as a common compound, the synthetic route is as follows.

72754-05-3, 6-bromo-1-((2-(trimethylsilyl)ethoxy)methyl)-1,8-naphthyridin-2(1H)-one To a solution of 6-bromo-1,8-naphthyridin-2(1H)-one (0.1 g, 0.444 mmol) in DMF (2 mL) was added sodium hydride (0.021 g, 0.889 mmol) at 0 C. The reaction was stirred at 0 C. for 30 min, then SEM-Cl (0.118 mL, 0.667 mmol) was added. The reaction was stirred at room temperature overnight, then diluted with ammonium chloride solution, extracted with ethyl acetate, dried over Na2SO4, and concentrated. The crude product was purified by flash chromatography on silica gel using 20% ethyl acetate in petroleum ether to give 6-bromo-1-((2-(trimethylsilyl)ethoxy)methyl)-1,8-naphthyridin-2(1H)-one (0.12 g, 76%). 1HNMR 400 MHz (CDCl3): 0.034 (s, 9H), 0.95-0.99 (m, 2H), 3.73-3.77 (m, 2H), 5.92 (s, 2H), 6.75-6.77 (m, 1H), 7.56-7.58 (m, 1H), 7.96-7.98 (m, 1H), 8.63-8.64 (m, 1H).

As the paragraph descriping shows that 72754-05-3 is playing an increasingly important role.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; King, Dalton; Macor, John E.; Olson, Richard E.; Iwuagwu, Christiana I.; Karageorge, George N.; US2013/79338; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

6-Bromo-1,8-naphthyridin-2-ol, cas is 72754-05-3, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.

72754-05-3, Step 1: A mixture of 6-bromo-i,8-naphthyridin-2(1H)-one (1.0 equiv) and 2,5-dihydrofuran (10 equiv) in AcOH (0.05 M) was irradiated with UVA lamps (Rayonet reactor, RPR3 500 A bulbs) at RT overnight. The mixture was filtered, washing with EtOAc, and the solids were dried in vacuo. The so-obtained residue was purified via flash chromatography over silica gel, eluting with DCM and 0-20% EtOAc gradient to provide the title (rac)-2-bromo- 6a,6b,7,9,9a,9b-hexahydrofuro[3 ?,4?: 3 ,4]cyclobuta[ 1,2-c] [1 ,8]naphthyridin-6(5H)-one as a yellow solid in 9% yield. ?H NIVIR (400 IVIHz, DMSO-d6) oe 10.60 (s, 1H), 8.20 (m, 1H), 7.85 (m, 1H), 4.13 (d,J= 9.4 Hz, 1H), 3.97 (d,J= 9.6 Hz, 1H), 3.38 (m, 3H), 3.06 (d,J 8.9, 5.1 Hz, 1H), 2.90 (dd, J= 9.7, 4.4 Hz, 1H), 2.84 (m, 1H). LCMS (m/z) (M+H) = 295.1/297.1, Rt = 0.69 mm.

As the rapid development of chemical substances, we look forward to future research findings about 72754-05-3

Reference£º
Patent; NOVARTIS AG; AVERSA, Robert John; BURGER, Matthew T.; DILLON, Michael Patrick; DINEEN JR., Thomas A.; KARKI, Rajesh; RAMURTHY, Savithri; RAUNIYAR, Vivek; ROBINSON, Richard; SARVER, Patrick James; (374 pag.)WO2017/103824; (2017); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem