Category: 1569-16-0

1569-16-0, 2-Methyl[1,8]-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 2-methyl-1,8-naphthyridine (6.024 g, 41.8 mmol) (from step 1) in anhydrous THF (140 mL) at -40 ¡ãC under nitrogen atmosphere was added a 1.0 M solution of lithium bis(trimethylsilyl)amide in THF (88.0 mL) and the reaction mixture was stirred at -40 ¡ãC for 30 min to give a blood-red solution. After stirring for 30 min at – 40 ¡ãC, neat diethyl carbonate (5.60 mL) was added drop wise to above solution in 5 min and the reaction mixture was warmed up to 0 ¡ãC (ice-bath) and stirred at that temperature for 2 h to give a dark reddish-orange solution. The reaction mixture was quenched with saturated aqueous ammonium chloride solution (60.0 mL) to give an orange-red solution and the THF was removed in vacuo to give an orange-red mixture. The resulting mixture was extracted with ethyl acetate (3¡Á50 mL). The organic layers were combined, washed with brine, dried over anhydrous Na2SO4/MgSO4, filtered and evaporated in vacuo to afford a dark orange-red crystalline solid (8.65 g). The crude residue was purified by Silica-gel flash chromatography using a Varian SF-40-120 g Super Flash silica gel column and elution with 10-100percent ethyl acetate in n-heptane to afford the desired product as a yellow-orange crystalline solid (7.76 g, yield 85percent). LC-MS analysis of the solid shows the desired product’s mass: m/z 217 (M+H) and m/z 239 (M+Na); Calculated for C12H12N2O2: 216.23. 1H NMR (400 MHz, DMSO-d6): delta 1.21 (t, J = 7.0 Hz, 3H), 4.10 (q, 2H), 4.89 (s, 1H), 6.77 (d, J = 9.38 Hz, 1H), 7.14 (m, 1H), 7.46 (d, J = 9.36 Hz, 1H), 7.89 (d, 1H), 8.36 (d, 1H), 11.80 (brs, 1H, -OH). 1H NMR of the isolated product was superimposable with that of an authentic sample of the product.

1569-16-0 2-Methyl[1,8]-Naphthyridine 74073, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; SAINT LOUIS UNIVERSITY; INDALO THERAPUETICS, INC.; RUMINSKI, Peter, G.; GRIGGS, David, W.; SEIWERT, Scott; (155 pag.)WO2018/132268; (2018); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, 2-Methyl[1,8]-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 2-methyl-l,8-naphthyridine (2 g, 13.9 mmol) in ethanol (35mL) was added 10percent Pd/C, and the reaction mixture was stirred under H2 (10 psi) for 24 hours.Palladium was filtered out through celite and washed with excess ethanol. The filtrate wasconcentrated under vacuum to give 1.7 g (83percent) pink solid. NMR (CD3OD) 5 7.07 (d, 1H, J= 7.38 Hz), 6.32 (d, 1H, J = 7.25 Hz), 3.36-3.33 (m, 2H), 2.76-2.65 (m, 2H), 2.22 (s, 3H),25 1.87-1.82 (m, 2H). M+H=149.15.

1569-16-0 2-Methyl[1,8]-Naphthyridine 74073, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; PHARMACIA CORPORATION; WO2005/51904; (2005); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, 2-Methyl[1,8]-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Int-19B. Ethyl (?)-4-(2-(l,8-naphthyridin-2-yl)vinyl)-lH-pyrrole-2-carboxylate: A solution of Int-19A (0.300 g, 2.08 mmol), commercially available ethyl 4-formyl-lH- pyrrole-2-carboxylate (0.348 g, 2.08 mmol), and 4-methylbenzenesulfonamide (0.356 g, 2.08 mmol) in toluene (4.5 mL) was stirred at reflux for 21 h. The precipitate was collected, triturated with DCM (2x) and the solid air-dried under vacuum to yield Int-19B (0.519 g, 94%) as a yellow solid. NMR (500 MHz, DMSO-c) delta 12.14 (br. s., 1H), (0504) 9.01 (dd, J = 4.3, 2.1 Hz, 1H), 8.41 – 8.28 (m, 2H), 7.82 (d, J = 16.2 Hz, 1H), 7.76 (d, J = 8.5 Hz, 1H), 7.52 (dd, J = 8.0, 4.1 Hz, 1H), 7.46 (s, 1H), 7.24 – 7.16 (m, 2H), 4.27 (q, J = (0505) 7.2 Hz, 2H), 1.31 (t, J= 7.0 Hz, 3H). HPLC retention time (Method 1): 1.973 mia; LCMS (ES): m/z 294.0 [M+H]+.

As the paragraph descriping shows that 1569-16-0 is playing an increasingly important role.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; ZHAO, Guohua; MIGNONE, James; (117 pag.)WO2018/89360; (2018); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1569-16-0,2-Methyl[1,8]-Naphthyridine,as a common compound, the synthetic route is as follows.

2-methyl-1,8-naphthyridine (288 mg, 2 mmol) and twice the equimolar amount of selenium dioxide (221.92 mg-443.84 mg, 2 mmol-4 mmol) was dissolved in 50 ml of 1,4-dioxane under nitrogen or without nitrogen protection at 80 ¡ã C to 130 ¡ã C for 8-16 hours. During the reaction, the silica gel plate was detected at any time until the basic reaction of 2-methyl-1,8-naphthyridine was completed and a new point was generated. After completion of the reaction, the reaction mixture was suspended, purified on silica gel column with dichloromethane to obtain 1,8-naphthyridine-2-aldehyde.

The synthetic route of 1569-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; TECHNICAL INSTITUTE OF PHYSICS AND CHEMISTRY, CHINESE ACADEMY OF SCIENCES; FU, WENFU; ZHAO, CHUNCHAO; (14 pag.)CN104974181; (2017); B;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, 2-Methyl[1,8]-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The starting material tert-butyl 7-(2-hydroxyethyl)-2-methyl-3,4-dihydro-l,8- naphthyridine-l(2H)-carboxylate was prepared as follows: To a stirred solution of 2-methylnaphthyridine (2.0 g, 13.9 mmol) in THF (5 ml) was added at -78¡ãC MeLi 1.6M (7.2 ml, 41.7 mmol) over 5 minutes. The reaction mixture was left to stir at -780C for 2 hours, then at room temperature for 2 hours. Then a careful5 hydrolysis at 0¡ãC with water was followed by extraction of the aqueous layer with diethyl ether. The organic layer was dried and concentrated to give 2,7-dimethyl-l,2-dihydro-l,8- naphthyridine as a red oil (1.98 g, 90percent); Mass Spectrum [M+H]+ = 161; 1H NMR Spectrum (DMSO-d6) 1.20 (d, 3H), 2.14 (s, 3H), 4.41-4.49 (m, IH), 5.46 (ddd, IH), 6.17 (dd, IH), 6.20 (d, IH), 6.44 (s, IH), 6.90 (d, IH).

The synthetic route of 1569-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2007/141473; (2007); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, 2-Methyl[1,8]-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 5 2-methyl-5,6,7,8-tetrahydro-1,8-naphthyridine The compound was prepared according to the procedure as described in WO 0033838. To a solution of 2-methyl-1,8-naphthyridine (2 g, 13.9 mmol) in ethanol (35 ml) was added 10percent Pd/C, and the reaction mixture was stirred under H2 (10 psi) for 24 hours. Palladium was filtered out through celite and washed with excess ethanol. The filtrate was concentrated under vacuum to give 1.7 g (83percent) pink solid. NMR (CD3OD) delta 1.82-1.87 (m, 2H), 2.22 (s, 3H), 2.65-2.76 (m, 2H), 3.33-3.36 (m, 2H), 6.32 (d,1H, J=7.25 Hz), 7.07 (d, 1H, J=7.38 Hz). Mass spectrometry: 149.15 (M+H)+.

The synthetic route of 1569-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pharmacia Corporation; US6921767; (2005); B2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

1569-16-0, 2-Methyl[1,8]-Naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of selenium dioxide (8.61 g, 77.56 mmol) in 1,4 dioxane (140 mL) with 0.5 mL ofwater was stirred at 100 ¡ãC for 5 mm. The mixture was cooled down to 0 ¡ãC and 2-Methyl-I ,8-naphthyridine (7 g, 48.5 mmol) was added dropwise. The mixture was heated again at100 ¡ãC for 5 h. Completion of the reaction was monitored by TLC. The reaction mixturewas filtered through celite bed, washed with EtOAc (50 mL) and concentrated. Theresulting crude mixture was dissolved in EtOAc (150 mL) and washed with water (3 x 60mL), brine (30 mL), dried over Na2SO4 and concentrated to give the title compound (brownsolid). 1H NMR (300 MHz, DMSO-d6): 6 10.18 (5, IH), 9.28-9.27 (m, IH), 8.74 (d, J = 8.1 Hz, IH), 8.63 (d, J= 8.1 Hz, IH), 8.11 (dd, J= 8.4, 1.2 Hz, IH), 7.83-7.79 (m, IH). LCMS:(Method B) 159.0 (M +H), Rt. 2.44 mm, 91 .59percent (Max). HPLC: (Method B) Rt 2.41 mm, 87.86percent (Max).

1569-16-0 2-Methyl[1,8]-Naphthyridine 74073, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; KULKARNI, Santosh, S.; GIRI, Awadut, Gajendra; (280 pag.)WO2017/144633; (2017); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1569-16-0,2-Methyl[1,8]-Naphthyridine,as a common compound, the synthetic route is as follows.

adding 0.3 mmol of 2-methyl-1,8-naphthyridine, 0.75 mmol of elemental iodine, and 2 mL of dimethyl sulfoxide to a 15 mL pressure-resistant tube.The reaction was stirred magnetically at 110 C for 4 hours. After the reaction was cooled, 0.36 mmol of p-toluenesulfonylhydrazide and 0.9 mmol of potassium phosphate trihydrate were added, and magnetic stirring was carried out at 110 C for 6 hours. After the reaction was completed, the reaction solution was completed. Extraction, organic layer washing, drying, distillation under reduced pressure to obtain a crude product, crude product with petroleum ether / ethyl acetate = 1.5:1 ~ 2:1 (V / V) as the eluent for column separation and purification The desired product, the product is a yellow solid with a yield of 65%.

1569-16-0 2-Methyl[1,8]-Naphthyridine 74073, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; Yantai University; Zhu Yanping; Lv Xucheng; Sun Jina; He Hangli; Sun Yuanyuan; Weng Weizhao; Wang Ru; Lv Lijuan; Huang Qiang; (17 pag.)CN110105355; (2019); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem