Brief introduction of 1309774-03-5

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

0391-2 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (79 mg), bis(pinacolato)diboron (99 mg), (1,1′-bis(diphenylphosphino)ferrocene)palladium(II) dichloride (26 mg), potassium acetate (64 mg), and 1,4-dioxane (2 mL) was stirred at 80 C. for 2 hours in a nitrogen atmosphere. 4-Iodo-3-propyl-1-(3-(pyrrolidin-1-yl)propyl)-1H-pyrazole (113 mg), sodium carbonate (69 mg), bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (23 mg), and water (0.2 mL) were added thereto, followed by stirring at 80 C. for 3 hours. The reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (methanol-ethyl acetate, NH silica), thereby obtaining 2-chloro-7-(3-propyl-1-(3-(pyrrolidin-1-yl)propyl)-1H-pyrazol-4-yl)-1,5-naphthyridine (53 mg). MS m/z (M+H): 384.

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Introduction of a new synthetic route about 1309774-03-5

With the rapid development of chemical substances, we look forward to future research findings about 1309774-03-5

7-Bromo-2-chloro-1,5-naphthyridine, cas is 1309774-03-5, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.

In a sealed tube, a mixture of 7-bromo-2-chloro-1,5-naphthyridine 4b (2.50 g, 10.3 mmol) and 28% aqueous ammonia solution (60 mL) in dioxane (60 mL) was heated at 140 C for 24 h. Then, the reaction mixture was allowed to cool at room temperature and water was added. The aqueous layer was extracted with ethyl acetate, dried over anhydrous sodium sulfate, filtrated and the solvent was removed under reduced pressure. The crude mixture was purified by column chromatography on silica gel eluting with dichloromethane, then dichloromethane/ethanol 98:2 to give compound 5 as a white solid (1.95 g, 85%); Rf=0.39 (CH2Cl2/EtOH, 96:4); mp: 168-169 C; 1H NMR (400 MHz, [D6]DMSO): delta=8.57 (d, J=2.1 Hz, 1H), 8.05 (d, J=2.1 Hz, 1H), 7.96 (d, J=9.1 Hz, 1H), 6.98 (br s, 2H), 6.04 (d, J=9.1 Hz, 1H); 13C NMR (100 MHz, [D6]DMSO): delta= 159.1, 145.1, 144.2, 138.6, 137.7, 133.8, 119.6, 116.9; MS (ESI) m/z (%): 224.0 (100) [M+H]+, 226.1 (100) [M+H+2]+.

With the rapid development of chemical substances, we look forward to future research findings about 1309774-03-5

Reference£º
Article; Defaux, Julien; Antoine, Maud; Loge, Cedric; Le Borgne, Marc; Schuster, Tilmann; Seipelt, Irene; Aicher, Babette; Teifel, Michael; Guenther, Eckhard; Gerlach, Matthias; Marchand, Pascal; Bioorganic and Medicinal Chemistry Letters; vol. 24; 16; (2014); p. 3748 – 3752;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Introduction of a new synthetic route about 1309774-03-5

With the rapid development of chemical substances, we look forward to future research findings about 1309774-03-5

7-Bromo-2-chloro-1,5-naphthyridine, cas is 1309774-03-5, it is a common heterocyclic compound, the naphthyridine compound, its synthesis route is as follows.

0399-2 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (48 mg), bis(pinacolato)diboron (60 mg), (1,1′-bis(diphenylphosphino)ferrocene)palladium(II) dichloride (16 mg), potassium acetate (39 mg), and 1,4-dioxane (2 mL) was stirred at 80 C. for 2 hours in a nitrogen atmosphere. 4-(4-Iodo-1H-pyrazol-1-yl)pyridine (75 mg), sodium carbonate (42 mg), bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (14 mg), and water (0.2 mL) were added thereto, followed by stirring at 80 C. for 8 hours. The reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (methanol-ethyl acetate-hexane), thereby obtaining 2-chloro-7-(1-(pyridin-4-yl)-1H-pyrazol-4-yl)-1,5-naphthyridine (29 mg). MS m/z (M+H): 308.

With the rapid development of chemical substances, we look forward to future research findings about 1309774-03-5

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Brief introduction of 1309774-03-5

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

0478-3 A suspension of 7-bromo-2-chloro-1,5-naphthyridine (48 mg), bis(pinacolato)diboron (60 mg), (1,1′-bis(diphenylphosphino)ferrocene)palladium(II) dichloride (16 mg), and potassium acetate (39 mg) in 1,4-dioxane (2 mL) was stirred at 80 C. for 2 hours in a nitrogen atmosphere. 1-(4-(4-Iodo-1H-pyrazol-1-yl)piperidin-1-yl)ethanone (75 mg), sodium carbonate (42 mg) and bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (14 mg) were added to the reaction mixture, followed by stirring at 80 C. for 3 hours. The reaction mixture was cooled to room temperature, the insolubles were filtered off, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (methanol-ethyl acetate), thereby obtaining 1-(4-(4-(6-chloro-1,5-naphthyridin-3-yl)-1H-pyrazol-1-yl)piperidin-1-yl)ethanone (35 mg). MS m/z (M+H): 356.

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Simple exploration of 1309774-03-5

1309774-03-5 7-Bromo-2-chloro-1,5-naphthyridine 58310544, anaphthyridine compound, is more and more widely used in various.

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 3.1: 7-Bromo-[1,5]naphthyridin-2-ylamine [Show Image] In a sealed reactor, 500 mg (1.23 mmol, 1 eq) of 7-bromo-2-chloro-1,5-naphthyridine and 7 mL (41.6 mmol, 33 eq) of 20% aqueous ammonia solution were introduced in 7 mL of dioxane. The mixture was stirred at 160 C for 24 h. The mixture was allowed to reach rt and water was added. Aqueous layer was extracted with ethyl acetate. Organic layers were dried over Na2SO4, filtered and evaporated to dryness. The residue was purified by column chromatography using methylene chloride and then methylene chloride /ethanol : 98/2 as eluent. The solvent was evaporated to dryness to afford 220 mg of white powder with 80% yield. Yield: 220 mg (80 % of theory). m.p.: 168-169 C. 1H-NMR (DMSO-d6, 400 MHz): delta.= 8,57 (d, 1H); 8,05 (d, 1H); 7,96 (d, 1H); 6,04 (d, 1H); 6,98 (s, 2H) ppm. MS: m/z 225 (M+H+).

1309774-03-5 7-Bromo-2-chloro-1,5-naphthyridine 58310544, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; Aeterna Zentaris GmbH; EP2332939; (2011); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Analyzing the synthesis route of 1309774-03-5

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1309774-03-5,7-Bromo-2-chloro-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

0003-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (30 mg), 1,3,4-thiadiazole-2-amine (25 mg) and potassium carbonate (17 mg) in dimethylsulfoxide (0.5 mL) was stirred at 150 C. for 30 minutes using a microwave reaction apparatus. The reaction mixture was cooled to room temperature, and water was added thereto. The solid matter was collected by filtration, thereby obtaining N-(7-bromo-1,5-naphthyridin-2-yl)-1,3,4-thiadiazole-2-amine.

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Downstream synthetic route of 1309774-03-5

As the paragraph descriping shows that 1309774-03-5 is playing an increasingly important role.

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 4b: Synthesis of 7-bromo-2-morpholino-l,5-naphthyridine F-32) [00336] A mixture of 7-bromo-2-chloro-l,5-naphthyridine (F-31) (200 mg, 0.82 mmol, 1.0 eq) and morpholine (10 mL) was stirred in a sealed-tube at 140 C overnight. The reaction mixture was cooled to RT, diluted with ethyl acetate (150 mL) and then washed with brine, dried over Na2S04 and filtered. The filtrate was concentrated in vacuo to afford the desired product 7-bromo-2-morpholino- 1,5-naphthyridine (F-32) (180 mg, 74.7% yield). ESI-MS m/z : 294.01 [M+H]+.

As the paragraph descriping shows that 1309774-03-5 is playing an increasingly important role.

Reference£º
Patent; INTELLIKINE, LLC; REN, Pingda; LI, Liansheng; CHAN, Katrina; WO2013/78441; (2013); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Analyzing the synthesis route of 1309774-03-5

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1309774-03-5,7-Bromo-2-chloro-1,5-naphthyridine,as a common compound, the synthetic route is as follows.

0399-2 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (48 mg), bis(pinacolato)diboron (60 mg), (1,1′-bis(diphenylphosphino)ferrocene)palladium(II) dichloride (16 mg), potassium acetate (39 mg), and 1,4-dioxane (2 mL) was stirred at 80 C. for 2 hours in a nitrogen atmosphere. 4-(4-Iodo-1H-pyrazol-1-yl)pyridine (75 mg), sodium carbonate (42 mg), bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (14 mg), and water (0.2 mL) were added thereto, followed by stirring at 80 C. for 8 hours. The reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography (methanol-ethyl acetate-hexane), thereby obtaining 2-chloro-7-(1-(pyridin-4-yl)-1H-pyrazol-4-yl)-1,5-naphthyridine (29 mg). MS m/z (M+H): 308.

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Simple exploration of 1309774-03-5

1309774-03-5 7-Bromo-2-chloro-1,5-naphthyridine 58310544, anaphthyridine compound, is more and more widely used in various.

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

0387-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (100 mg), pyrimidine-5-amine (38 mg), tris(dibenzylideneacetone)dipalladium(0) (37 mg), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (47 mg), cesium carbonate (267 mg), and 1,4-dioxane (2 mL) was stirred at 80 C. for 6 hours. The reaction mixture was cooled to room temperature, the insolubles were filtered off using celite, and the obtained solution was purified by silica gel column chromatography (methanol-ethyl acetate), thereby obtaining 6-chloro-N-(pyrimidin-5-yl)-1,5-naphthyridine-3-amine (32 mg). MS m/z (M+H): 258.

1309774-03-5 7-Bromo-2-chloro-1,5-naphthyridine 58310544, anaphthyridine compound, is more and more widely used in various.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

Brief introduction of 1309774-03-5

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

1309774-03-5, 7-Bromo-2-chloro-1,5-naphthyridine is a naphthyridine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 0757 0757-1 A mixture of 7-bromo-2-chloro-1,5-naphthyridine (600 mg), 1,3-dimethyl-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrazole (442 mg), bis(di-tert-butyl(4-dimethylaminophenyl)phosphine)dichloropalladium(II) (174 mg), sodium carbonate (522 mg), 1,4-dioxane (24 mL), and water (2.4 mL) was stirred at 100 C. for 3 hours in a nitrogen atmosphere. The reaction mixture was cooled to room temperature, and the solvent was distilled off under reduced pressure. The reaction residue was purified by silica gel column chromatography (chloroform-methanol, NH silica), thereby obtaining 2-chloro-7-(1,3-dimethyl-1H-pyrazol-4-yl)-1,5-naphthyridine (412 mg) as a white solid. MS m/z (M+H): 259.

The synthetic route of 1309774-03-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; FURUYAMA, Hidetomo; KURIHARA, Hideki; TERAO, Takahiro; NAKAGAWA, Daisuke; TANABE, Shintaro; KATO, Takayuki; YAMAMOTO, Masahiko; SEKINE, Shinichiro; MASHIKO, Tomoyuki; INUKI, Shinsuke; UEDA, Satoshi; US2015/322063; (2015); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem