Month: August 2020

As a common heterocyclic compound, it belong naphthyridine compound,8-Chloro-2-methoxy-1,5-naphthyridine,249889-68-7,Molecular formula: C9H7ClN2O,mainly used in chemical industry, its synthesis route is as follows.,249889-68-7

81.i. N1-(6-methoxy-[1,5]naphthyridin-4-yl)-ethane-1,2-diamine A mixture of 8-chloro-2-methoxy-1,5-naphthyridine (1.71 g, 8.81 mmol) and ethylenediamine (1.18 mL, 2 eq.) was heated slowly to 80 C. over 1 h and subsequently up to 100 C. for 2 h. After cooling to rt, the yellow solution was taken in DCM and successively washed with NaHCO3. The aq. layer was back extracted with DCM (3 times) and the combined org. layers were concentrated to afford the title intermediate as a pale yellow oil (0.98 g, 51% yield). MS (ESI, m/z): 219.4 [M+H+].

With the synthetic route has been constantly updated, we look forward to future research findings about 8-Chloro-2-methoxy-1,5-naphthyridine,belong naphthyridine compound

Reference£º
Patent; Actelion Pharmaceuticals Ltd.; US2010/137290; (2010); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,8-Chloro-2-methoxy-1,5-naphthyridine,249889-68-7,Molecular formula: C9H7ClN2O,mainly used in chemical industry, its synthesis route is as follows.,249889-68-7

Under an atmosphere of argon, a mixture of 4-chloro-6-methoxy-l,5-naphthyridine (0.485 g), methyl 2-(5-hydroxy-3-methoxypyridin-2-yl)acetate (0.493 g), caesium carbonate (1.63 g) and DMF (10 ml) was stirred and heated to 13O0C for 7 hours. The resultant mixture was cooled to ambient temperature and partitioned between ethyl acetate and water. The organic phase was dried over magnesium sulphate and evaporated. The residue was purified by column chromatography on silica using increasingly polar mixtures of ethyl acetate and methanol as eluent. There was thus obtained methyl 2-[3-methoxy-5-(6-methoxy- l,5-naphthyridin-4-yloxy)pyridin-2-yl]acetate as a solid (0.51 g); 1H NMR Spectrum: T/GB2007/001221- 171 -(DMSOd6) 3.63 (s, 3H), 3.79 (s, 2H), 3.8 (s, 3H)5 3.83 (s, 3H), 7.13 (d, IH), 7.29 (d, IH)5 7.44 (d, IH)5 7.98 (d, IH)5 8.3 (d, IH)5 8.68 (d, IH); Mass Spectrum: M+H+ 356.

With the synthetic route has been constantly updated, we look forward to future research findings about 8-Chloro-2-methoxy-1,5-naphthyridine,belong naphthyridine compound

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2007/113548; (2007); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,8-Chloro-2-methoxy-1,5-naphthyridine,249889-68-7,Molecular formula: C9H7ClN2O,mainly used in chemical industry, its synthesis route is as follows.,249889-68-7

Example 81 : (S)-3-(2,3-dihydro-benzo [ 1 ,4] dioxin-6-yl)-5- { [2-(6-methoxy- [l,5]naphthyridin-4-ylamino)-ethylamino]-methyl}-oxazolidin-2-one:; 81. i. N1 -(6-methoxy-fl, 5]naphthyridin-4-yl)-ethane-l,2-diamine:; A mixture of 8-chloro-2-methoxy-l,5-naphthyridine (1.71 g, 8.81 mmol) and ethylenediamine (1.18 mL, 2 eq.) was heated slowly to 800C over 1 h and subsequently up to 1000C for 2 h. After cooling to rt, the yellow solution was taken in DCM and successively washed with NaHCO3. The aq. layer was back extracted with DCM (3 times) and the combined org. layers were concentrated to afford the title intermediate as a pale yellow oil (0.98 g, 51% yield). MS (ESI, m/z): 219.4 [M+H+].

With the synthetic route has been constantly updated, we look forward to future research findings about 8-Chloro-2-methoxy-1,5-naphthyridine,belong naphthyridine compound

Reference£º
Patent; ACTELION PHARMACEUTICALS LTD; WO2008/126024; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO452,mainly used in chemical industry, its synthesis route is as follows.,249889-68-7

The residue was suspended in diisopropylethylamine (7 ml), phosphorus oxychloride (1.5 ml) was added to the suspension, and the mixture was stirred at 100C for one hr. Water was added to the reaction mixture under ice cooling. The aqueous layer was neutralized with an aqueous sodium hydrogencarbonate solution, and the organic layer was extracted with ethyl acetate. The ethyl acetate layer was then washed with water and was dried over anhydrous sodium sulfate. The solvent was removed by distillation under the reduced pressure, and the residue was purified by column chromatography with an acetone-chloroform system to give 8-chloro-2-methoxy-[1,5]naphthyridine (572 mg, yield 29%) (3 steps). 8-Chloro-2-methoxy-[1,5]naphthyridine (50 mg), 5,6-dimethyl-[2,2′]bipyridinyl-3-ol (51 mg), and 4-dimethylaminopyridine (94 mg) were dissolved in dimethylsulfoxide (1.5 ml), cesium carbonate (251 mg) was added to the solution, and the mixture was stirred at 130C overnight. The reaction mixture was cooled to room temperature, and water was added thereto. The organic layer was extracted with chloroform, and the chloroform layer was then washed with water and saturated brine and was dried over anhydrous sodium sulfate. The solvent was removed by distillation under the reduced pressure, and the residue was purified by thin layer chromatography with a methanol-chloroform system to give the title compound (70 mg, yield 75%). 1H-NMR (CDCl3, 400 MHz): delta 2.34 (s, 3H), 2.66 (s, 3H), 3.92 (s, 3H), 6.92 (d, J = 5.4 Hz, 1H), 7.17 – 7.26 (m, 3H), 7.65 (dd, J = 7.6, 7.6 Hz, 1H), 8.16 (d, J = 8.1 Hz, 1H), 8.36 (s, 1H), 8.53 (d, J = 5.9 Hz, 1H), 8.58 (m, 1H) Mass spectrometric value (ESI-MS, m/z): 381 (M+Na)+

With the synthetic route has been constantly updated, we look forward to future research findings about 8-Chloro-2-methoxy-1,5-naphthyridine,belong naphthyridine compound

Reference£º
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1724268; (2006); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO463,mainly used in chemical industry, its synthesis route is as follows.,952059-69-7

To a suspension of tert- butyl (6-bromo- [1,2,4] triazolo [4 , 3 -a] pyridin-3- yUmethylcarbamate (0.900 g, 2.75 mmol) in CH2Cl2 (10 mL) was added TFA (0.848 ml, 11.0 mmol) and the mixture stirred at rt. After 30 minutes additional TFA (0.848 ml, 11.0 mmol) was added, and the mixture stirred at rt 2 h more then concentrated. The residue was taken up into 2-butanol (5 mL) and combined with 8-chloro-3-methoxy-l, 5-naphthyridine (0.535 g, 2.75 mmol) in a 5 mL microwave vessel. The vessel was sealed and the mixture heated in the microwave for 10 min at 120 C with a 60 sec prestir. The mixture was concentrated, diluted with DCM and stirred with 2N NaOH (pH 14) for 30 minutes. The solid was filtered to afford the title compound as a beige solid.

With the synthetic route has been constantly updated, we look forward to future research findings about 8-Chloro-3-methoxy-1,5-naphthyridine,belong naphthyridine compound

Reference£º
Patent; AMGEN INC.; WO2008/8539; (2008); A2;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO272,mainly used in chemical industry, its synthesis route is as follows.,952059-69-7

Five 20 mL microwave vials were each charged with 4-aminophenol (0.700 mg, 33 mmol) and 3 equivalents of cesium carbonate in 6.0 ml of DMF. The mixture was stirred at RT for 10 minutes. Following addition of 8-chloro-3-methoxy-1,5-naphthyridine (1 g, 26 mmol), the reaction vessels were capped and irradiated at 150 C. for 15 min in the microwave, at which time the reaction was determined complete by LCMS. The mixture was allowed to cool to ambient temperature and material from the five vessels was combined. A deep brown solid crashed out with addition of water. Filtered solids, washed with water and dried overnight in the vacuum oven to afford 4-(7-methoxy-1,5-naphthyridin-4-yloxy)benzenamine as a brown solid. [0359] Alternatively, the title compound may be prepared by the following method: In a nitrogen purged sealed pressure vessel, dissolved 4-aminophenol (0.617 g, 5.65 mmol) in DMF (0.030 L). Cesium carbonate (3.68 g, 11.3 mmol) was added and the mixture was stirred at RT for 5 min. Added 8-chloro-3-methoxy-1,5-naphthyridine (1.00 g, 5.14 mmol), heated to 90 C., stirred for 17 h. The mixture was allowed to cool to RT and was concentrated. The crude material was triturated with methanol, filtered, washed with methanol followed by water, and air dried to yield 4-(7-methoxy-1,5-naphthyridin-4-yloxy)benzenamine as brown solid. MS [M+H]=268.1; Calc’d 267.3 for C15H13N3O2.

With the synthetic route has been constantly updated, we look forward to future research findings about 8-Chloro-3-methoxy-1,5-naphthyridine,belong naphthyridine compound

Reference£º
Patent; CEE, Victor J.; DEAK, Holly L.; DU, Bingfan; GEUNS-MEYER, Stephanie D.; HUA, Zihao; MARTIN, Matthew W.; MARX, Isaac; NGUYEN, Hanh Nho; OLIVIERI, Philip R.; PANTER FABER, Kathleen; ROMERO, Karina; SCHENKEL, Laurie; WHITE, Ryan; US2014/336182; (2014); A1;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,100491-29-0,Molecular formula: C17H10ClF3N2O3,mainly used in chemical industry, its synthesis route is as follows.,100491-29-0

Example 7 7-Chloro-1-(2,4-difluorophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid. A mixture of tetrahydrofuran (450 cm3), water (50 cm3), methanesulfonic acid (127 cm3) and ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate (United Kingdom Patent Publication No. GB 2,191,776) was heated at reflux for 1 hour, and then cooled to 25 C. The resulting crystals were isolated, washed with tetrahydrofuran, and dried under vacuum to afford 41.3 g (89%) of the above-titled compound: m.p.=250 C.; (Found: C, 50.4; H, 1.7; Cl, 9.9; F, 16.0; N, 8.0. C15 H6 ClF3 N2 O3 requires C, 50.8; H, 1.7; Cl, 10.0; F, 16.1; N, 7.9%); 1 H NMR (300 MHz, d6 -DMSO) delta 13.9 (s, 1H), 9.09 (s, 1H), 8.77 (d, J=7.5 Hz, 1H), 7.86 (td, J=5.9 and 8.8 Hz, 1H), 7.66 (ddd, J=2.7, 9.0 and 11.8 Hz, 1H), 7.39 (tm, J=8.6 Hz, 1H), 7.39 (tm, J=8.6 Hz, 1H); numax (DRIFTS) cm-1 3130, 3060, 2947, 2885, 2821, 2723, 2637, 2594, 1734, 1641, 1623, 1579, 1544, 1516.

With the synthetic route has been constantly updated, we look forward to future research findings about Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,belong naphthyridine compound

Reference£º
Patent; Pfizer Inc.; US6114531; (2000); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,100491-29-0,Molecular formula: C17H10ClF3N2O3,mainly used in chemical industry, its synthesis route is as follows.,100491-29-0

General procedure: Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate (1) / carboxylic acid (2) (0.001 mol) and appropriate substituted benzazol-2-thiol derivative (0.001 mol) or N,N- dimethyl-(3-piperazin-1-yl)propan-1-amine (0.001 mol) and K2CO3 were dissolved in acetone (30 mL). The solution was refluxed at 40 C for 12 h. Reaction mixture was cooled down and adjusted to pH=7 by AcOH. Acetone was evaporated, the residue was washed with water, filtered, dried and recrystallized from EtOH.

With the synthetic route has been constantly updated, we look forward to future research findings about Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,belong naphthyridine compound

Reference£º
Article; Gencer, Huelya Karaca; Levent, Serkan; Acar Cevik, Ulviye; Oezkay, Yusuf; Ilg?n, Sinem; Bioorganic and Medicinal Chemistry Letters; vol. 27; 5; (2017); p. 1162 – 1168;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,100491-29-0,Molecular formula: C17H10ClF3N2O3,mainly used in chemical industry, its synthesis route is as follows.,100491-29-0

a 1.91 g (5 mmol) 7-chlor-1-(2,4-difluorophenyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid-ethylester is dissolved in 20 ml acetonitrile. 864 mg (6 mmol) 3-dimethylaminomethyl-3-hydroxy-pyrrolidine and 672 mg (6 mmol) 1,4-diazabicyclo[2.2.2]octane are added, and the mixture is stirred for 4 hours at room temperature. Thereafter 20 ml of water are added, and the pH is adjusted to 9 with deluted NaOH. The precipitate is isolated by filtration, washed with water and dried in vacuo. Yield: 1.66 g (68% of theory) 1-(2,4-difluorophenyl)-7-(3-dimethylaminomethyl-3-hydroxy-1-pyrrolidinyl)-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid-ethylester, melting point 156-158 C.

With the synthetic route has been constantly updated, we look forward to future research findings about Ethyl 7-chloro-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,belong naphthyridine compound

Reference£º
Patent; Bayer Aktiengesellschaft; US5173484; (1992); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong naphthyridine compound,Ethyl 7-chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,96568-07-9,Molecular formula: C14H12ClFN2O3,mainly used in chemical industry, its synthesis route is as follows.,96568-07-9

EXAMPLE 62 Ethyl 1-cyclopropyl-6-fluoro-7-[3-(1,2,3-triazol-1-yl]piperidin-1-yl]-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate 3-(1,2,3-triazol-1-yl)piperidine (150 mg, 0.96 mmol) was added to a solution of ethyl 1-cyclopropyl-6-fluoro-7-chloro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate (150 mg, 0.48 mmol) in a mixture of acetonitrile (10 ml) and pyridine (3 ml). The reaction mixture was heated at 100 C. for 6 hrs and then concentrated to dryness. The residue was diluted with water and thus solid separated was filtered, washed thoroughly with water and dried. Yield 90 mg, m.p. 205-206 C.; 1 H NMR (CDCl3) delta: 8.58 (s, 1H), 8.15 (d, 1H), 7.78 (s, 1H), 7.65 (s, 1H), 4.90 (m, 2H), 4.40 (m, 3H), 3.45 (m, 3H), 1.75-2.50 (m, 4H), 1.40 (t, 3H), 0.95-1.35 (m, 4H).

With the synthetic route has been constantly updated, we look forward to future research findings about Ethyl 7-chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydro-1,8-naphthyridine-3-carboxylate,belong naphthyridine compound

Reference£º
Patent; SynPhar Laboratories, Inc.; US5342846; (1994); A;,
1,8-Naphthyridine – Wikipedia
1,8-Naphthyridine | C8H6N2 – PubChem